Honda e:Ny1 charging cable
The figures quoted in the information on charging below are estimations.
Charging time of the Honda e:Ny1, 20 to 80 %
For the selected version, depending on where you charge. Estimates based on manufacturer data.
- Domestic socket · 2.3 kW 16h1812 km recovered per hour
- Reinforced socket · 3.7 kW 10h0820 km recovered per hour
- 7.4 kW charging station 5h0440 km recovered per hour
Above 11 kW, the car's on-board charger limits the power.
Which cable for your Honda e:Ny1?
One cable per use, chosen from the plug, the phase and the charging power of the selected version. Charging times from 20 to 80 %.
On a public charger or a wallbox
Your e:Ny1 accepts three-phase power: this 32 A Type 2 cable uses its 11 kW on 11 and 22 kW chargers.
On a public charger or a wallbox
Your e:Ny1 charges in single phase, up to 11 kW: this Type 2 cable is all it needs on any charger, in town or at home.
On a public charger or a wallbox
Your e:Ny1 has a Type 1 inlet: this Type 2 / Type 1 cable connects it to public chargers and to wallboxes with a Type 2 socket.
At home, on a Green'up reinforced socket
The cable for Green'up sockets: 16 A, 3.7 kW, enough to recover 160 km overnight on your e:Ny1. Our best-selling cable.
Anywhere, without a charger
A portable charger plugs into a household, reinforced or industrial socket and charges your e:Ny1 at up to 11 kW: the solution on the road or while waiting for a wallbox.
Which cable length?
- 5 m the charger or the socket is right next to the charging port, in a garage or a straight-in space.
- 7 m the most common choice, for an angled space, a carport or a shared charger.
- 10 m the socket is far from the space, or the charging port changes side from one car of the household to the other.
7 products for Honda e:Ny1 charging cable 68.8 kWh - 11 kW - triphase
- Shipped within 48 h
- Free pickup point delivery from 100 €
- Pay in 3 or 4 instalments, no fees, from €200
- An adviser on +33 3 67 880 054
Frequently asked questions
The 22 kW three-phase one: it uses the 11 kW of the charger on 22 kW stations and stays compatible with 7.4 and 11 kW stations. The 7.4 kW single-phase cable costs barely less and holds the car back.
A 16 A reinforced socket cable with a control box, Type 2 connector on the car side: 10h08 from 20 to 80 %, 20 km recovered per hour.
5 m covers a space facing the station; take 7 m if you park in reverse or at an angle, 10 m for a station across a driveway. Never an extension cord: the cable heats up and the station may refuse to charge.
Generally speaking, the charging cable of your Honda e:Ny1 EV plugs in at the front, at the rear, or on the side of the vehicle via the charging port.
Charging your Honda e:Ny1 with a cable for a household socket takes a long time because using a standard socket limits the current to 10 A (i.e. a little over 2 kW).
When charging at a public station with your Honda e:Ny1, the charging time varies depending on the power rating of the installation.
The recommended products correspond to the wallbox with the ideal configuration to charge your Honda e:Ny1 version. To simplify the selection among the different compatible charging stations, we have highlighted the perfect match between the electrical installation, the vehicle and the wallbox that will allow you to charge in the best conditions.
