Hyundai Tucson PHEV (old) charging: cable, reinforced socket or wallbox?
The data quoted for this vehicle reflect WLTP standards. The figures given in the information on charging below are estimations.
Charging time of the Hyundai Tucson PHEV (old), 20 to 80 %
For the selected version, depending on where you charge. Estimates based on manufacturer data.
- Domestic socket · 2.3 kW 3h2612 km recovered per hour
- Reinforced socket · 3.7 kW 2h0820 km recovered per hour
- 7.4 kW charging station 1h0640 km recovered per hour
Above 7.2 kW, the car's on-board charger limits the power.
How long to charge for your daily trips?
Move the slider: the charging time needed to recover your daily kilometres with the selected version.
- Domestic socket · 2.3 kW 3h20one night is enough
- Reinforced socket · 3.7 kW 2h00one night is enough
- 7.4 kW charging station 1h00one night is enough
Estimate from manufacturer data. Charging slows down above 80 %.
Our recommendations for your Hyundai Tucson PHEV (old)
One solution per use, chosen from the plug, the phase and the charging power of the selected version. Charging times from 20 to 80 %.
At home, on a reinforced socket
The simplest way to charge every night: a Green'up socket fitted by an electrician, much safer than a household socket, with the 16 A cable of your Tucson PHEV (old).
On a public charger or a wallbox
Your Tucson PHEV (old) accepts three-phase power: this 32 A Type 2 cable uses its 7.2 kW on 11 and 22 kW chargers.
On a public charger or a wallbox
Your Tucson PHEV (old) charges in single phase, up to 7.2 kW: this Type 2 cable is all it needs on any charger, in town or at home.
On a public charger or a wallbox
Your Tucson PHEV (old) has a Type 1 inlet: this Type 2 / Type 1 cable connects it to public chargers and to wallboxes with a Type 2 socket.
A wallbox at home
A 22 kW three-phase wallbox uses the 7.2 kW of your Tucson PHEV (old) and will keep up with your next car.
A wallbox at home
Not essential for a plug-in hybrid: a 7.4 kW single-phase wallbox charges your Tucson PHEV (old) faster than a socket and will serve your next electric car.
19 products for Charging your Hyundai Tucson PHEV (old) 265 ch - 7.2 kW - monophase (2021)
- Shipped within 48 h
- Free pickup point delivery from 100 €
- Pay in 3 or 4 instalments, no fees, from €200
- An adviser on +33 3 67 880 054
Frequently asked questions
Yes, with a domestic socket cable limited to 10 A, that is 2.3 kW: count 3h26 from 20 to 80 %. For daily use, a 3.7 kW reinforced Green'up socket brings that down to 2h08 and protects the circuit with a dedicated breaker.
Not necessarily. Its battery goes from 20 to 80 % in 2h08 on a 3.7 kW reinforced Green'up socket: one night is plenty. A station brings a tethered cable and charge scheduling, not a shorter time beyond 7.2 kW.
If you have not found the right version of your Hyundai Tucson PHEV (old), please contact us. We will help you find the right charging cable or charging station for your all-electric or plug-in hybrid car.
The maximum power rating when charging in single-phase and 3-phase is different depending on the vehicle type. Charging via a 3-phase cable or charging station means you can charge up to 22kW, whereas the maximum in single-phase is 7kW.
Purchasing the right cable or charging station for your vehicle is a guarantee of optimum safety when you charge your EV.
The recommended products correspond to the wallbox with the ideal configuration to charge your Hyundai Tucson PHEV (old) version. To simplify the selection among the different compatible charging stations, we have highlighted the perfect match between the electrical installation, the vehicle and the wallbox that will allow you to charge in the best conditions.