Bolloré Bluecar charging cable

Bolloré Bluecar charging cable

Charge using a Bolloré Bluecar charging cable for Type 2 or Type 3C public charging stations or a Bolloré Bluecar charger equipped with a car-side Type 1 connector. Select your electric cable with sufficient length to reach from the right rear side side of the car to the charging stations or power outlet. You can now use your Bolloré Bluecar cable in all possible configurations for hassle-free charging.
The figures quoted in the information on charging below are estimations.

Charging time of the Bolloré Bluecar, 20 to 80 %

For the selected version, depending on where you charge. Estimates based on manufacturer data.

  • Domestic socket · 2.3 kW 7h2911 km recovered per hour
  • Reinforced socket · 3.7 kW 4h3918 km recovered per hour

Above 4 kW, the car's on-board charger limits the power.

Which cable for your Bolloré Bluecar?

One cable per use, chosen from the plug, the phase and the charging power of the selected version. Charging times from 20 to 80 %.

On a public charger or a wallbox

Your Bluecar has a Type 1 inlet: this Type 2 / Type 1 cable connects it to public chargers and to wallboxes with a Type 2 socket.

Type 2 to Type 1 charging cable (T2/T1) – 2.3kW to 7.4kW
Our expert recommends this product for the Bolloré Bluecar when your home has a Single-phase electrical supply. Learn more Optimal product
Sold Out

Which cable length?

  • 5 m the charger or the socket is right next to the charging port, in a garage or a straight-in space.
  • 7 m the most common choice, for an angled space, a carport or a shared charger.
  • 10 m the socket is far from the space, or the charging port changes side from one car of the household to the other.
Read our guide to cable lengths

2 products for Bolloré Bluecar charging cable 30 kWh - 4 kW - monophase (2013)

Type 2 to Type 1 charging cable (T2/T1) – 2.3kW to 7.4kW
Our expert recommends this product for the Bolloré Bluecar when your home has a Single-phase electrical supply. Learn more Optimal product
Sold Out
Type 3C / Type 1 charging cable - 7.4kW
Our expert recommends this product for the Bolloré Bluecar when your home has a Single-phase electrical supply. Learn more Optimal product
  • Shipped within 48 h
  • Free pickup point delivery from 100 €
  • Pay in 3 or 4 instalments, no fees, from €200
  • An adviser on +33 3 67 880 054

Frequently asked questions

A 16 A reinforced socket cable with a control box, Type 1 connector on the car side: 4h39 from 20 to 80 %, 18 km recovered per hour.

5 m covers a space facing the station; take 7 m if you park in reverse or at an angle, 10 m for a station across a driveway. Never an extension cord: the cable heats up and the station may refuse to charge.

Generally speaking, the charging cable of your Bolloré Bluecar EV plugs in at the front, at the rear, or on the side of the vehicle via the charging port.

Charging your Bolloré Bluecar with a cable for a household socket takes a long time because using a standard socket limits the current to 10 A (i.e. a little over 2 kW).
When charging at a public station with your Bolloré Bluecar, the charging time varies depending on the power rating of the installation.

The recommended products correspond to the wallbox with the ideal configuration to charge your Bolloré Bluecar version. To simplify the selection among the different compatible charging stations, we have highlighted the perfect match between the electrical installation, the vehicle and the wallbox that will allow you to charge in the best conditions.

Other electric and plug-in hybrid Bolloré models

All Bolloré models All brands